ProTool 8FT Pressure Washing & Soft Washing Truck Skid

Two Cleaning Systems. One Serious Rig.

Why choose between pressure washing and soft washing when you can bring both?

The ProTool 8FT Pressure Washing & Soft Washing Truck Skid combines high-output pressure washing with a dedicated gas-powered soft wash system, giving professional cleaning crews the equipment to tackle everything from concrete and commercial surfaces to roofs, siding, and delicate exterior finishes.

Powered by two independent Honda engines, this commercial cleaning skid delivers 8.5 GPM at 4,000 PSI for pressure washing alongside a Comet BPX25 soft wash system for high-volume chemical application and low-pressure rinsing.

One truck. Two dedicated systems. A whole lot of cleaning capability.

High Pressure Meets High Volume.

Some surfaces need serious pressure. Others need the right chemistry.

The Honda GX690 pressure washing system brings the muscle for concrete, sidewalks, parking areas, and demanding exterior cleaning. With 8.5 GPM of flow, crews can cover substantial surface areas efficiently.

When it's time to switch to soft washing, the dedicated Honda GX200-powered Comet BPX25 takes over. This gas-powered diaphragm pump delivers approximately 7 GPM at up to 220 PSI, providing consistent flow for applying cleaning solutions and rinsing surfaces that don't belong anywhere near 4,000 PSI.

Two purpose-built systems, each doing what it does best.

Dial It In. Then Get to Work.

Good soft washing isn't just about pumping chemicals. It's about controlling what goes on the surface.

The ¾" clear chemical metering manifold gives operators direct control over water, sodium hypochlorite, and surfactant ratios. A set-and-forget external pressure regulator maintains the desired soft wash operating pressure and bypasses excess flow.

And when it's time to rinse? A dedicated manual soft wash rinse valve makes switching from chemical application to rinsing straightforward.

Simple controls. Consistent application. Less messing around with equipment.

Water, Bleach & Soap. All Onboard.

A dual-system skid needs a tank layout that supports both cleaning methods.

With 200 gallons of onboard water, a 100-gallon SH/bleach tank, and a 7-gallon surfactant tank, this rig carries dedicated supplies for pressure washing and soft washing without relying on loose chemical containers scattered around the truck.

Integrated inlet water filtration helps keep incoming debris out of the system, while the organized tank layout keeps the equipment together and ready for work.

Everything where it belongs.

Electric Reels. Because Nobody Likes Hand Cranking.

Running two cleaning systems means more hoses. That doesn't mean more headaches.

Electric hose reels keep the pressure washing, soft washing, and water inlet hoses organized, making deployment and retrieval easier throughout the workday.

• 200 FT × ⅜" high-pressure hose

• 300 FT × ½" soft wash hose, rated to 300 PSI

• 150 FT × ¾" water inlet hose

Less time wrestling with hoses. More time putting them to work.

Organized Equipment. Not Organized Chaos.

A serious cleaning rig needs more than pumps and tanks.

Dedicated utility lock boxes provide secure storage for tools, fittings, and accessories, while a surface cleaner storage box keeps bulky equipment out of the way.

An integrated electrical panel, battery box, and charger bring the electrical components together into one organized system.

Because a professional rig should make the job easier, not turn every tool change into a scavenger hunt.

Built the ProTool Way

The equipment matters. So does what holds it all together.

Built around ProTool's all-aluminum construction, this skid features a welded base and bolt-together frame design for strength, practical service access, and long-term durability.

The standardized 8FT truck skid platform integrates two independent cleaning systems, onboard chemical storage, electric reels, and dedicated equipment storage into one commercial-grade package.

No cobbled-together components. No wasted space. Just a purpose-built rig that's ready to earn its keep.

Under the Hood — Technical Specifications

Built for the Job

The ProTool 8FT Pressure Washing & Soft Washing Truck Skid is a dual-engine commercial exterior cleaning system combining a Honda GX690-powered 8.5 GPM / 4,000 PSI pressure washer with a Honda GX200-powered Comet BPX25 gas soft wash pump. Featuring dedicated water and chemical storage, a ¾" clear metering manifold, external pressure regulation, electric hose reels, and integrated equipment storage, this all-aluminum skid delivers professional pressure washing and soft washing capability on one standardized 8FT truck platform.