Description
Use this inline ball valve to shut off the flow in your Water-Fed pole line. 3/16" (4.7MM) barb creates a tight fit with 5/16" (8mm) Water-Fed pole hose.
No clamp is necessary, although always encouraged.
This is a 1/4 turn ball valve with no stop, it rotates 360 degrees.
When handle is in line with hose the flow is full/open
When the handle is 90 degrees from the hose the flow is stopped
When the handle is in between those the flow is regulated
Installation Instructions:
- Heat up the hose end with hot water for roughly 10 seconds.
- Work hose onto hose barb all the way.
- (optional) Add in a clamp to secure the hose to the barb.
the nitty gritty
- CA Prop 65:
- Warning: This product contains chemicals or materials known to the State of California to cause cancer, birth defects or other reproductive harm.
- __MaxDiscount:
- 5
- __Sort:
- 14700
- __SearchKeywords:
- ball valve, inline valve, water-fed pole, hose connector, 5/16 inch valve, 8mm barb, plumbing accessory, flow control valve, shut off valve, ProTool equipment, SH-566
- __SearchKeyRight:
- ball valve, inline valve, water-fed pole, hose connector, 5/16 inch valve, 8mm barb, plumbing accessory, flow control valve, shut off valve, ProTool equipment, SH-566
- __SearchKeyUPC:
- , 00669893019096
- __SearchUPC:
- , 00669893019096
- __SearchUPCRight:
- , 00669893019096
