Description
RO Membrane Housing SS 40in 1/2in in 1/2 out 300psi ProTool
Stainless Steel RO (Reverse Osmosis) Membrane housing is manufactured from Stainless Steel and is rated to 300psi.
- Housing: 304 Stainless Steel
- End Caps: ABS Plastic
- Rated Pressure: 300psi
- Inlet Port 1/2in
- Outlet Port: 1/2in
- Mounting: Stainless Band and Mounting Block
The Center Port on the End Cap is used for Permeate, filtered water out, ether end can be use, plug the opposite side.
The Port Offset from Center is used for source water inlet and brine water outlet. Orient the RO Membrane Flow Arrow in the same orientation as this inlet and outlet water attachment
RODI 20in Filters with 1 Standard flow RO and 1 RO Boost Pump
the nitty gritty
- __MaxDiscount:
- 15
- __Sort:
- 52000
- __SearchKeywords:
- ProTool RO membrane housing, stainless steel RO housing, 1/2 inch RO membrane, 300psi membrane housing, water filtration housing, reverse osmosis housing, 304 stainless steel housing, ABS plastic end caps, permeate water outlet, mounting block for R
- __SearchKeyRight:
- housing, stainless steel RO housing, 1/2 inch RO membrane, 300psi membrane housing, water filtration housing, reverse osmosis housing, 304 stainless steel housing, ABS plastic end caps, permeate water outlet, mounting block for RO, 4040 RO Housings
- __SearchUPC:
- , 00669893021594
- __SearchUPCRight:
- , 00669893021594
- __content_1:
- {"u":"/expert-advice-learning/drone-building-cleaning-efficient-and-effective","t":"Drone Building Cleaning: Pure Water Systems for 8 GPM"}
- __content_2:
- {"u":"/expert-advice-learning/i-have-80-psi-and-i-am-still-not-getting-anything-out-of-my-system","t":"Low Pure Water Output: Fixing Flow at 80 PSI"}
