ProTool Oily Man

 

Is a great product for the removal of oxidation from vinyl and aluminum siding. Mix at 12oz to 1 gallon of water or stronger as you observe oxidation removal

Mix Ratios:

Cleaning Oil Accumulation on Concrete Floors, Parking Garages, Drive Through, Gas Station Pads, and Oily Dumpster Pads:

Chem Sprayer

Add 12 oz. to 1 Gallon of Water and apply with a chemical sprayer.

Down-streaming or X-Jetting Add 1 Gal of Oily Man to 1 Gallon of water in the Draw Bucket for a 1 to 10 or 10% mix rate down-streamer or X-Jet.
Apply copious product to insure a saturated surface, allow to dwell for 60 minutes or more, Pressure wash off the area and clean the area.

For Dark, Long-Standing, Heavy Accumulation of Oil Spots on Concrete Parking Pads, Greasy Equipment, Drive Through:

Chem Sprayer Add 24 oz. to 1 Gallon of Water and apply with a chemical sprayer.
Apply copious product to insure a saturated surface, allow to dwell for 60 minutes or more, Pressure wash off the area and clean the area

Oily Man Clever Mix Rates

12 oz to 1 gallon for Oil on Concrete, etc
A 10 to 1 rate Set Ring to: 10%

Use whip draw tube direct from Bottle or from a 5 gallon pail

24 oz to 1 Gallon on Heavy Accumulation
A 5 to I rate Set Ring to 20%

Use whip draw tube direct from Bottle or from a 5 gallon pail