Truck Mount Pressure Washers
Park. Pull Hose. Get to Work.
Keep your pressure washer on the rig and put your time into cleaning. Shop truck mount pressure washers for truck-bed skids, flatbeds, and trailer installations, with commercial gas-powered options for residential routes, commercial flatwork, and demanding rinsing jobs.
Choose the flow that fits your workload, then build the water supply and layout around it. Less unloading. More getting on with it.
Planning your installation? Read our pressure washing truck skid design guide for practical advice on bed space, payload, and equipment placement.
Truck Mount Pressure Washers for a Dedicated Working Rig
Truck mount pressure washers give your cleaning operation a permanent home. Instead of unloading a portable machine at each stop, you work from an installed setup with the pressure washer, water supply, and hose management arranged around your routine. That can mean simpler setup, less equipment handling, and a more organized start to every job.
This category focuses on individual pressure washer units for integration into a truck skid, flatbed, or trailer. These machines are a starting point for the pressure washing side of your rig; tanks, reels, plumbing, electrical connections, and other installation components need to be planned separately. Choose the machine around the work you expect to do, then give it the space, water supply, and service access it needs.
Choose Your Flow Around the Jobs on Your Schedule
The right truck mount pressure washer should support your regular workload and the work you want to pursue next. A compact residential setup has different priorities from a rig spending long days on commercial concrete. Flow affects rinsing speed, accessory selection, water storage, and how much equipment your platform must carry.
- The BE 5.5 GPM 3500 PSI pressure washer is an option for operators balancing residential cleaning capability with a compact installation.
- Machines around the 8 GPM class are worth evaluating for higher-production residential work, commercial flatwork, and substantial rinsing, provided the water supply supports them.
- The BE 10 GPM 3500 PSI pressure washer offers a higher-flow option for larger commercial workloads and demanding water-delivery requirements.
PSI still matters, but more pressure does not automatically mean more productivity. Once pressure is appropriate for the surface, additional flow can help move loosened dirt and detergent away faster. Our pressure washer GPM comparison guide explains how flow changes the working day. Buy for completed jobs, not bragging rights on a specification label.
Plan the Water Supply Before Choosing the Tank
A high-flow machine needs a feed system that can keep up. Measure the incoming supply available at your typical jobs, then compare it with the pressure washer’s demand. If an 8 GPM machine receives only 5 GPM of refill water, it draws down stored water at 3 gallons per minute during continuous spraying. A buffer tank buys operating time; it does not eliminate the shortfall.
Tank volume is only part of the installation. Outlet size, inlet hose diameter, fittings, filtration, and available inlet pressure determine whether water reaches the pump adequately. A large tank connected through restrictive plumbing can still leave a pump short of water. Plan the feed arrangement around the specific pump’s requirements, including whether gravity feed is suitable or a different supply arrangement is needed.
Make the Truck Layout Work for the Operator
Start with the machine’s footprint, mounting points, operating clearances, and service requirements. Then position the tank, reels, battery where needed, and plumbing around a usable workflow. Controls should be reachable, hoses should avoid hot components and sharp edges, and routine maintenance should not require moving a full tank.
Water weighs approximately 8.34 pounds per gallon, so 200 gallons adds about 1,668 pounds before counting the tank or equipment. Evaluate the complete loaded installation against vehicle payload and axle ratings, including occupants, tools, chemicals, and fuel. Our truck skid design guide covers the relationship between bed size, payload, and layout.
Gas engines need outdoor operation with exhaust kept away from occupants, windows, doors, and air intakes. Do not treat an open door as sufficient protection for operation inside an enclosed vehicle or trailer. Leave the engine breathing room—and leave yourself working room.
Pump Drive, Starting, and Service Access
Belt-driven pressure washers use pulleys and belts to transfer engine power to the pump, commonly allowing lower pump RPM. That makes belt drive worth evaluating for installations with extended operating hours, while adding belt inspection, alignment, and tensioning tasks. Compare the complete machine rather than assuming drive type alone determines durability or tank-feeding capability.
For electric-start installations, account for the required battery, cable sizing, circuit protection, and a suitable charging plan. Electric start does not automatically mean remote start compatibility. Keep engine and pump service points accessible, including drains, filters, belts, and components that may eventually need removal. A clean-looking rig should still be easy to work on when something needs attention.
Match the Equipment at the End of the Hose
Long hose runs and restrictive fittings can reduce working pressure, especially as flow increases. Select hose diameter for the intended flow and distance, and match the pressure and temperature ratings of hoses, reels, guns, fittings, and tools. Choose nozzle orifices for the machine’s flow and intended working pressure; spray angle alone does not establish the correct nozzle size.
For surface cleaners, use approximately 4 inches of cleaning width per GPM as a starting point. A 5.5 GPM machine works out to about 22 inches, while 8 GPM works out to 32 inches. In practice, 24–28 inches is often the sweet spot on an 8 GPM machine. Wider relative to flow generally means slower passes; smaller generally lets you move faster. Correct nozzle sizing and equipment ratings remain essential.
Leave Room for Heat and Routine Maintenance
If greasy concrete, fleet washing, or equipment degreasing is part of your business, evaluate hot water before finalizing the layout. A compatible downstream burner adds heated-water capability but also needs space, fuel, operating clearances, and service access. Match its flow capacity, pressure rating, and heating output to the pressure washer. Our hot water vs. cold water guide explains where that investment earns its keep.
Keep ownership practical from day one. Inspect feed filters, hoses, connections, oil levels where applicable, and mounting hardware on the prescribed schedule. Avoid extended bypass operation because recirculating water can heat up, and protect the system from freezing. For integrated rigs, the ProTool Build Maintenance Guide provides broader system-care guidance alongside the individual equipment manuals.
Truck Mount Pressure Washer FAQs
What is a truck mount pressure washer?
A truck mount pressure washer is a machine intended for secure installation on a mobile cleaning platform rather than regular unloading at each job. It connects with the rig’s water supply and working hose arrangement. The pressure washer itself is one component of the complete installation.
Can truck mount pressure washers also go on a trailer?
Yes, suitable truck-mount units can also be installed on trailers or flatbeds when their mounting and operating requirements are met. The platform must support the loaded equipment, provide secure attachment, and allow safe engine operation. Layout and water supply still need to suit the machine.
Should I choose 5.5 GPM or a higher-flow machine?
Choose 5.5 GPM when compact installation and capable residential cleaning are priorities; evaluate higher flow when substantial rinsing and larger commercial jobs justify it. Higher flow also increases water demand and may change storage requirements. Choose the machine and supply system together.
What size buffer tank do I need?
Tank size depends on machine demand, incoming refill rate, usable stored water, and expected trigger time. Divide usable gallons by the difference between outgoing and incoming flow to estimate continuous spraying time when demand exceeds refill. Allow a reserve so the pump remains adequately supplied.
Can I install one in any pickup truck?
No—the complete loaded system must fit within the specific truck’s payload, axle ratings, and available installation space. Include full operating fluids, occupants, and other carried equipment in the assessment. An empty space in the bed is not proof of available carrying capacity.
Can one high-flow pressure washer run two operators?
Only a system configured for multiple outlets can support two operators appropriately; fitting a tee alone does not establish a suitable setup. Available flow is shared rather than duplicated, and pressure regulation, unloaders, and nozzle sizing must support changing demand. Independent machines may be a better fit when each operator needs substantial flow.
Does a truck mount pressure washer include everything for installation?
No—do not assume the machine includes tanks, reels, batteries, plumbing, or installation hardware. Included equipment varies by model and package. Plan the complete installation against the specific product’s supplied components before ordering.
Build Around the Machine You Actually Need
Compare the truck mount pressure washers above, then map out the water feed, mounting space, hose system, and maintenance access before committing to the installation. For a complete rig, use the ProTool Build Configurator to explore equipment combinations and estimated pricing. A good installation should save effort at every stop—not give you more equipment to work around.